Services
Emergency
Language
Home/Services/Gas turbines
Gas turbines

Gas turbine overhaul, module by module.

Aeroderivative, heavy-duty and light industrial gas turbines overhauled to the engine manual, in the shop or in the field, with exchange engines when your schedule cannot wait.

AeroderivativeHeavy-duty frameLight industrialExchange & lease

Aeroderivative gas turbines

Gas generators and power turbines taken down to modules, inspected against the manual and rebuilt. Scope ranges from a hot-section refresh to a full inlet-to-exhaust overhaul.

FT4 / GG4FT8LM2500LM6000LM5000RB211Avon501-K
  • Standard overhaul: full teardown from inlet to exhaust
  • Condition-based overhaul: scope set by findings and future duty
  • Hot section and module repair or exchange
  • Gas generator and power turbine balancing
  • Fuel nozzle flow test, repair and exchange
  • Post-overhaul performance and vibration test

Heavy-duty frame turbines

Planned outages on frame units, from combustion inspection to major inspection, with hot gas path parts repaired in our component shop.

Frame 3Frame 5Frame 6BFrame 7E/EAFrame 9EW501
  • Combustion inspection, hot gas path and major inspection
  • Rotor life assessment, destack and restack
  • Buckets, nozzles, shrouds, liners and transition pieces refurbished
  • Rotor life extension beyond design hours
  • Outage planning, tooling and crane plans
  • Alignment and clearances to the manual

Light industrial turbines

Single-shaft and two-shaft units driving generators, compressors and pumps on platforms, pipelines and industrial sites.

Solar SaturnCentaurTaurusMarsSGT-100SGT-200SGT-400
  • Shop and field overhaul
  • Gearbox and accessory repair
  • Exchange engines and modules
  • Package restoration and re-commissioning
  • Mechanical-drive alignment and coupling work

Exchange, lease & logistics

Keep the plant online while the engine is in the shop: an overhauled exchange gas generator or a lease engine goes in, yours comes out.

  • Advance exchange of gas generators and modules
  • Lease engines for the duration of the overhaul
  • Transport stands, preservation and storage
  • Shipping, export and customs across the Americas
  • Removal and installation crews

Package & auxiliaries

The machine only runs if the package around it does. We overhaul the systems that trip units most often.

  • Lube oil systems, coolers and filtration
  • Gas and liquid fuel systems, dual-fuel conversion
  • Inlet filtration, anti-icing and inlet cooling
  • Enclosure ventilation, fire and gas detection
  • Exhaust, stack and catalyst interfaces

Testing & acceptance

Every overhauled unit is tested and the result is reported with its reference conditions, so the number on the sheet is the number your site will see.

  • Performance test per ASME PTC 22, corrected to reference conditions
  • Vibration baseline at speed and load
  • Borescope video record of the as-left condition
  • Fuel flow metered, LHV/HHV basis stated
  • Witnessed tests on request
Inspection levels

Four scopes. One plan for the next interval.

Indicative intervals for natural-gas duty. Starts, trips, fuel and your OEM manual set the real number; we confirm it from your records.

Combustion inspection

Heavy-duty · ~8,000–12,000 h
  • Liners, caps and transition pieces
  • Fuel nozzles flow tested
  • Crossfire tubes and igniters
  • Borescope of compressor and turbine

Hot gas path

Heavy-duty ~24,000 h · aero ~25,000 h
  • Everything in the combustion inspection
  • Turbine blades, nozzles and shrouds
  • Coatings stripped and re-applied
  • Clearances and alignment

Major overhaul

Heavy-duty ~48,000 h · aero ~50,000 h
  • Full teardown inlet to exhaust
  • Compressor and turbine rotors
  • Bearings, seals and casings
  • Test and as-left dossier

Condition-based

Scope set by findings
  • Scope from borescope and trends
  • Repair only what the data says
  • Next interval re-planned
  • Lower cost where condition allows
What you receive

Records at every decision point.

You approve the work from evidence, and you keep the evidence after the unit is back in service.

Before work

Findings report

Photo-documented teardown findings, measurements against limits and a repair disposition for every part.

Decision point

Priced scope

Line-item quote for repair, replace or exchange, with turnaround for each option, before work is released.

On handover

As-left dossier

Dimensions, clearances, coating and weld records, balance reports, test data and the next-interval plan.

Unit tripped · forced outage

A machine down is a clock running.

Call the emergency desk. An engineer takes the first diagnosis by phone, asks for trend data and borescope access, and mobilises a field crew when the problem cannot be cleared remotely.